ocropy
OCRopus is a collection of document analysis programs, not a turn-key OCR system. In order to apply it to your documents, you may need to do some image preprocessing, and possibly also train new models.
In addition to the recognition scripts themselves, there are a number of scripts for ground truth editing and correction, measuring error rates, determining confusion matrices, etc. OCRopus commands will generally print a stack trace along with an error message; this is not generally indicative of a problem (in a future release, we'll suppress the stack trace by default since it seems to confuse too many users).
Installing
To install OCRopus dependencies system-wide:
$ sudo apt-get install $(cat PACKAGES)
$ wget -nd https://github.com/zuphilip/ocropy-models/raw/master/en-default.pyrnn.gz
$ mv en-default.pyrnn.gz models/
$ sudo python setup.py install
Alternatively, dependencies can be installed into a Python Virtual Environment:
$ virtualenv ocropus_venv/
$ source ocropus_venv/bin/activate
$ pip install -r requirements.txt
$ wget -nd https://github.com/zuphilip/ocropy-models/raw/master/en-default.pyrnn.gz
$ mv en-default.pyrnn.gz models/
$ python setup.py install
An additional method using Conda is also possible:
$ conda create -n ocropus_env python=2.7
$ conda activate ocropus_env
$ conda install --file requirements.txt
$ wget -nd https://github.com/zuphilip/ocropy-models/raw/master/en-default.pyrnn.gz
$ mv en-default.pyrnn.gz models/
$ python setup.py install
To test the recognizer, run:
$ ./run-test
Running
To recognize pages of text, you need to run separate commands: binarization, page layout analysis, and text line recognition. The default parameters and settings of OCRopus assume 300dpi binary black-on-white images. If your images are scanned at a different resolution, the simplest thing to do is to downscale/upscale them to 300dpi. The text line recognizer is fairly robust to different resolutions, but the layout analysis is quite resolution dependent.
Here is an example for a page of Fraktur text (German); you need to download the Fraktur model from https://github.com/zuphilip/ocropy-models/raw/master/fraktur.pyrnn.gz to run this example:
# perform binarization
./ocropus-nlbin tests/ersch.png -o book
# perform page layout analysis
./ocropus-gpageseg 'book/????.bin.png'
# perform text line recognition (on four cores, with a fraktur model)
./ocropus-rpred -Q 4 -m models/fraktur.pyrnn.gz 'book/????/??????.bin.png'
# generate HTML output
./ocropus-hocr 'book/????.bin.png' -o ersch.html
# display the output
firefox ersch.html
There are some things the currently trained models for ocropus-rpred will not handle well, largely because they are nearly absent in the current training data. That includes all-caps text, some special symbols (including "?"), typewriter fonts, and subscripts/superscripts. This will be addressed in a future release, and, of course, you are welcome to contribute new, trained models.
You can also generate training data using ocropus-linegen:
ocropus-linegen -t tests/tomsawyer.txt -f tests/DejaVuSans.ttf
This will create a directory "linegen/..." containing training data suitable for training OCRopus with synthetic data.
Roadmap
| Project Announcements |
|---|
| The text line recognizer has been ported to C++ and is now a separate project, the CLSTM project, available here: https://github.com/tmbdev/clstm |
| New GPU-capable text line recognizers and deep-learning based layout analysis methods are in the works and will be published as separate projects some time in 2017. |
| Please welcome @zuphilip and @kba as additional project maintainers. @tmb is busy developing new DNN models for document analysis (among other things). (10/15/2016) |
A lot of excellent packages have become available for deep learning, vision, and GPU computing over the last few years. At the same time, it has become feasible now to address problems like layout analysis and text line following through attentional and reinforcement learning mechanisms. I (@tmb) am planning on developing new software using these new tools and techniques for the traditional document analysis tasks. These will become available as separate projects.
Note that for text line recognition and language modeling, you can also use the CLSTM command line tools. Except for taking different command line options, they are otherwise drop-in replacements for the Python-based text line recognizer.
Contributing
OCRopy and CLSTM are both command line driven programs. The best way to contribute is to create new command line programs using the same (simple) persistent representations as the rest of OCRopus.
The biggest needs are in the following areas:
- text/image segmentation
- text line detection and extraction
- output generation (hOCR and hOCR-to-* transformations)
CLSTM vs OCRopy
The CLSTM project (https://github.com/tmbdev/clstm) is a replacement for ocropus-rtrain and ocropus-rpred in C++ (it used to be a subproject of ocropy but has been moved into a separate project now). It is significantly faster than the Python versions and has minimal library dependencies, so it is suitable for embedding into C++ programs.
Python and C++ models can not be interchanged, both because the save file formats are different and because the text line normalization is slightly different. Error rates are about the same.
In addition, the C++ command line tool (clstmctc) has different command line options and currently requires loading training data into HDF5 files, instead of being trained off a list of image files directly (image file-based training will be added to clstmctc soon).
The CLSTM project also provides LSTM-based language modeling that works very well with post-processing and correcting OCR output, as well as solving a number of other OCR-related tasks, such as dehyphenation or changes in orthography (see our publications). You can train language models using clstmtext.
Generally, your best bet for CLSTM and OCRopy is to rely only on the command line tools; that makes it easy to replace different components. In addition, you should keep your OCR training data in .png/.gt.txt files so that you can easily retrain models as better recognizers become available.
After making CLSTM a full replacement for ocropus-rtrain/ocropus-rpred, the next step will be to replace the binarization, text/image segmentation, and layout analysis in OCRopus with trainable 2D LSTM models.
2 Apr 15, 2022
79 Jan 03, 2023
52 Dec 23, 2022
11.4k Jan 02, 2023
1 Jan 31, 2022
2 Oct 11, 2021
24 Dec 27, 2022
2.2k Jan 02, 2023
777 Jan 09, 2023
120 Dec 28, 2022
154 Dec 07, 2022
10 Jun 30, 2021
208 Dec 11, 2022
2 Sep 15, 2022
1 Jan 04, 2022
57 Dec 19, 2022
123 Dec 25, 2022
97 Dec 25, 2022
31 Nov 22, 2022
48 Jan 02, 2023