Wifijammer - Continuously jam all wifi clients/routers

Related tags

Networkingwifijammer
Overview

wifijammer

Continuously jam all wifi clients and access points within range. The effectiveness of this script is constrained by your wireless card. Alfa cards seem to effectively jam within about a block radius with heavy access point saturation. Granularity is given in the options for more effective targeting.

Requires: python 2.7, python-scapy, a wireless card capable of injection

Usage

Simple

python wifijammer

This will find the most powerful wireless interface and turn on monitor mode. If a monitor mode interface is already up it will use the first one it finds instead. It will then start sequentially hopping channels 1 per second from channel 1 to 11 identifying all access points and clients connected to those access points. On the first pass through all the wireless channels it is only identifying targets. After that the 1sec per channel time limit is eliminated and channels are hopped as soon as the deauth packets finish sending. Note that it will still add clients and APs as it finds them after the first pass through.

Upon hopping to a new channel it will identify targets that are on that channel and send 1 deauth packet to the client from the AP, 1 deauth to the AP from the client, and 1 deauth to the AP destined for the broadcast address to deauth all clients connected to the AP. Many APs ignore deauths to broadcast addresses.

python wifijammer -a 00:0E:DA:DE:24:8E -c 2

Deauthenticate all devices with which 00:0E:DA:DE:24:8E communicates and skips channel hopping by setting the channel to the target AP's channel (2 in this case). This would mainly be an access point's MAC so all clients associated with that AP would be deauthenticated, but you can also put a client MAC here to target that one client and any other devices that communicate with it.

Advanced

python wifijammer -c 1 -p 5 -t .00001 -s DL:3D:8D:JJ:39:52 -d --world
  • -c, Set the monitor mode interface to only listen and deauth clients or APs on channel 1

  • -p, Send 5 packets to the client from the AP and 5 packets to the AP from the client along with 5 packets to the broadcast address of the AP

  • -t, Set a time interval of .00001 seconds between sending each deauth (try this if you get a scapy error like 'no buffer space')

  • -s, Do not deauth the MAC DL:3D:8D:JJ:39:52. Ignoring a certain MAC address is handy in case you want to tempt people to join your access point in cases of wanting to use LANs.py or a Pineapple on them.

  • -d, Do not send deauths to access points' broadcast address; this will speed up the deauths to the clients that are found

  • --world, Set the max channel to 13. In N. America the max channel standard is 11, but the rest of the world uses 13 channels so use this option if you're not in N. America

Walking/driving around

python wifijammer -m 10

The -m option sets a max number of client/AP combos that the script will attempt to deauth. When the max number is reached, it clears and repopulates its list based on what traffic it sniffs in the area. This allows you to constantly update the deauth list with client/AP combos who have the strongest signal in case you were not stationary. If you want to set a max and not have the deauth list clear itself when the max is hit, just add the -n option like: -m 10 -n

All options:

python wifijammer [-a AP MAC] [-c CHANNEL] [-d] [-i INTERFACE] [-m MAXIMUM] [-n] [-p PACKETS] [-s SKIP] [-t TIME INTERVAL]

License

Copyright (c) 2014, Dan McInerney All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

  • Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
  • Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
  • Neither the name of Dan McInerney nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.


Owner
Dan McInerney
I like automating security stuff so I don't have to work. Coalfire researcher.
Dan McInerney
Wifijammer - Continuously jam all wifi clients/routers

wifijammer Continuously jam all wifi clients and access points within range. The effectiveness of this script is constrained by your wireless card. Al

Dan McInerney 3.5k Dec 31, 2022
GitHub action for sspanel automatically checks in to get free traffic quota

SSPanel_Checkin This is a dish chicken script for automatic check-in of sspanel for GitHub action, It is only applicable when there is no verification

FeedCatWithFish 7 Apr 28, 2022
An HTML interface for finetuning the sync map output from aeneas

finetuneas 3.0 finetuneas is a simple HTML interface for fine tuning sync maps output by aeneas Version 3.0 Easier adjusting time: following cells wil

Firat Özdemir 50 Mar 12, 2022
InfraGenie is allows you to split out your infrastructure project into separate independent pieces, each with its own terraform state.

🧞 InfraGenie InfraGenie is allows you to split out your infrastructure project into separate independent pieces, each with its own terraform state. T

Digger 53 Nov 23, 2022
Python 3.3+'s ipaddress for older Python versions

ipaddress Python 3.3+'s ipaddress for Python 2.6, 2.7, 3.2. This repository tracks the latest version from cpython, e.g. ipaddress from cpython 3.8 as

Philipp Hagemeister 103 Nov 11, 2022
Lets you remove all friends, leave GCs, and leave servers, in an instant!

anonymity Lets you remove all friends, leave GCs, and leave servers, in an instant! You can also do each of them by themselves. First, you need to get

1 Dec 07, 2021
Repo for investigation of timeouts that happens with prolonged training on clients

Flower-timeout Repo for investigation of timeouts that happens with prolonged training on clients. This repository is meant purely for demonstration o

1 Jan 21, 2022
A vpn that sits in your browser, accessible via a website

VPNInYourBrowser A vpn that sits in your browser, accessible via a website Example setup: https://VPNInBrowser.jaffa42.repl.co Setup Put the code onto

1 Jan 20, 2022
Python Scrcpy Client - allows you to view and control android device in realtime

Python Scrcpy Client This package allows you to view and control android device in realtime. Note: This gif is compressed and experience lower quality

LengYue 126 Jan 02, 2023
It can be used both locally and remotely (indicating IP and port)

It can be used both locally and remotely (indicating IP and port). It automatically finds the offset to the Instruction Pointer stored in the stack.

DiegoAltF4 13 Dec 29, 2022
Python module to interface with Tuya WiFi smart devices

TinyTuya Python module to interface with Tuya WiFi smart devices Description This python module controls and monitors Tuya compatible WiFi Smart Devic

Jason Cox 365 Dec 26, 2022
A fire and forget command-line tool to allow for easy transitions of VPN connections between a pool of AWS machines.

VPN Swapper A fire and forget command-line tool to allow for easy transitions of VPN connections between a pool of AWS machines. Dependencies poetry -

Workday 5 Jul 07, 2022
nettrace is a powerful tool to trace network packet and diagnose network problem inside kernel.

nettrace nettrace is is a powerful tool to trace network packet and diagnose network problem inside kernel on TencentOS. It make use of eBPF and BCC.

84 Jan 01, 2023
A simple multi-threaded time server and client in python.

time-server-client A simple multi-threaded time server and client in Python. This uses the latest match/case command found in Python 3.10 so requires

Zeeshan Mulk 1 Jan 29, 2022
Tool to get the top 100 of the fastest nodes in the Tor network. Based on Kirzahk tool.

Tor Network Top 100 IPs Tool to get the top 100 of the fastest nodes in the Tor network. Based on Kirzahk tool. Just execute top100ipstor.py to get th

Juan Manuel 0 Jan 23, 2022
Dshell is a network forensic analysis framework.

Dshell An extensible network forensic analysis framework. Enables rapid development of plugins to support the dissection of network packet captures. K

DEVCOM Army Research Laboratory 5.4k Jan 06, 2023
Python implementation of the Session open group server

API Documentation CLI Reference Want to build from source? See BUILDING.md. Want to deploy using Docker? See DOCKER.md. Installation Instructions Vide

Oxen 36 Jan 02, 2023
This tool extracts Credit card numbers, NTLM(DCE-RPC, HTTP, SQL, LDAP, etc), Kerberos (AS-REQ Pre-Auth etype 23), HTTP Basic, SNMP, POP, SMTP, FTP, IMAP, etc from a pcap file or from a live interface.

This tool extracts Credit card numbers, NTLM(DCE-RPC, HTTP, SQL, LDAP, etc), Kerberos (AS-REQ Pre-Auth etype 23), HTTP Basic, SNMP, POP, SMTP, FTP, IMAP, etc from a pcap file or from a live interface

1.6k Jan 01, 2023
A Project to resolve hostname and receive IP

hostname-resolver A Project to resolve hostname and receive IP Installation git clone https://github.com/ihapiw/hostname-resolver.git Head into the ho

iHapiW 5 Sep 12, 2022
TLD records archive. Revisiting the original TLDR project by mandatoryprogrammer, on the hunt for more root nameserver changes.

tldr A(nother) continuously updated historical TLD records archive. This repository is updated approximately every three hours with the results from D

Chris Partridge 11 Dec 14, 2022