OK so I am trying to make a gradient pen and I followed the link located here

https://wxpython.org/Phoenix/docs/html/wx.GraphicsRenderer.html#wx.GraphicsRenderer.CreatePen

which brought me to here

https://wxpython.org/Phoenix/docs/html/wx.GraphicsPenInfo.html#wx-graphicspeninfo

as outlined in the example

ctx = wx.GraphicsContext.Create(dc)
pen = ctx.CreatePen(wx.GraphicsPenInfo(wx.BLUE).Width(1.25).Style(wx.PENSTYLE_DOT))
ctx.SetPen(pen)

you can see wx..GraphicsPenInfo being used in the example This object does not exist in the wx module. not in 3.0.2 or in 4.0.7post1.

Operating system:

Windows 7 x64 SP1

wxPython version & source:

4.0.7.post1 msw (phoenix) wxWidgets 3.0.5
pypi

Python version & source:

3.7.5 Stackless 3.7 (tags/v3.7.5-slp:f7925f2a02, Oct 20 2019, 15:28:53) [MSC v.1916 64 bit (AMD64)] (cpython)
https://github.com/stackless-dev/stackless

Description of the problem: There are a few issues I am running into. I have attached an image to show the problems that are taking place.

• I am not able to draw any text that has an alpha channel. Well let me correct that. It draws the text, however the alpha channel is not used. You can see this in the attached image. Every color used in that image has an alpha channel. I did a screen capture with the frame placed over a white background so you would be able to see the problems. The white is not part of the example code below.

  I have tried with GCDC.DrawText and also GraphicsContext.DrawText and neither of them support an alpha channel.

• I am drawing a simple drop shadow using wx.Region to subtract the actual text from the bitmap where the shadow is drawn. The appearance starts out fine but as the text continues there ends up being areas that get improperly clipped, this issue gets worse as the text continues. you can see this problem in 1, 2 and 3 of the attached image.

  I have studied this fairly closely and if you look at the text you will see the text being antialiased to black. I am not sure why this is taking place, I have set the background text dolor to wx.TransparentColour

• I may have mentioned this before, I do not remember if I have or not. This problem only becomes evident when using an alpha channel. When rendering a rectangle the filled in area of the rectangle can be seen under the outline. This can be seen in the image item 5, you may need to zoom into the image to see it better.

  If you look at item 4 you do not see this issue because the filled in area has an alpha channel of 0.

  There needs to be some kind of a check to see if the pen has an alpha level is 0 < alpha < 255 and if that is the case then the filled in area needs to be adjusted to be smaller. I am sure this same issue also exists with the other functions as well. There is also another issue regarding the use of these types of functions. If you take this example

  MemoryDC.SetPen(wx.Pen(wx.Colour(0, 0, 255, 255), 4))
  MemoryDC.SetBrush(wx.Brush(wx.Colour(255, 0, 0, 255))
  MemoryDC.DrawRectangle(0, 0, 150, 150)
  

  The resulting rectangle is NOT 150, 150. it ends up being 154, 154. I do know this problem has existed for a very long time and to correct it would cause a lot of problems for projects already using wxPython. Perhaps the addition of a global flag that can be set that would tell wxPython to render to exact sizes.

I may be doing something incorrect, tho I do not think that I am.

Here is the frame as seen without the white behind it.

This example script will ONLY run on Windows.

import wx
import ctypes

from ctypes.wintypes import LONG, HWND, INT, HDC, HGDIOBJ, BOOL, DWORD

UBYTE = ctypes.c_ubyte
GWL_EXSTYLE = -20
WS_EX_LAYERED = 0x00080000
ULW_ALPHA = 0x00000002
AC_SRC_OVER = 0x00000000
AC_SRC_ALPHA = 0x00000001

class POINT(ctypes.Structure):
    _fields_ = [
        ('x', LONG),
        ('y', LONG)
    ]

class SIZE(ctypes.Structure):
    _fields_ = [
        ('cx', LONG),
        ('cy', LONG)
    ]

class BLENDFUNCTION(ctypes.Structure):
    _fields_ = [
        ('BlendOp', UBYTE),
        ('BlendFlags', UBYTE),
        ('SourceConstantAlpha', UBYTE),
        ('AlphaFormat', UBYTE)
    ]

user32 = ctypes.windll.User32
gdi32 = ctypes.windll.Gdi32

# LONG GetWindowLongW(
#   HWND hWnd,
#   int  nIndex
# )

GetWindowLongW = user32.GetWindowLongW
GetWindowLongW.restype = LONG

# LONG SetWindowLongW(
#   HWND hWnd,
#   int  nIndex,
#   LONG dwNewLong
# );
SetWindowLongW = user32.SetWindowLongW
SetWindowLongW.restype = LONG

# HDC GetDC(
#   HWND hWnd
# );
GetDC = user32.GetDC
GetDC.restype = HDC

# HWND GetDesktopWindow();
GetDesktopWindow = user32.GetDesktopWindow
GetDesktopWindow.restype = HWND

# HDC CreateCompatibleDC(
#   HDC hdc
# );
CreateCompatibleDC = gdi32.CreateCompatibleDC
CreateCompatibleDC.restype = HDC

# HGDIOBJ SelectObject(
#   HDC     hdc,
#   HGDIOBJ h
# );
SelectObject = gdi32.SelectObject
SelectObject.restype = HGDIOBJ

# BOOL UpdateLayeredWindow(
#   HWND          hWnd,
#   HDC           hdcDst,
#   POINT         *pptDst,
#   SIZE          *psize,
#   HDC           hdcSrc,
#   POINT         *pptSrc,
#   COLORREF      crKey,
#   BLENDFUNCTION *pblend,
#   DWORD         dwFlags
# );
UpdateLayeredWindow = user32.UpdateLayeredWindow
UpdateLayeredWindow.restype = BOOL

COLORREF = DWORD

def RGB(r, g, b):
    return COLORREF(r | (g << 8) | (b << 16))


class Frame(wx.Frame):

    def __init__(self):
        wx.Frame.__init__(
            self,
            None,
            -1,
            style=(
                wx.FRAME_SHAPED |
                wx.NO_BORDER |
                wx.FRAME_NO_TASKBAR |
                wx.STAY_ON_TOP
            ),
            size=(600, 300),
            pos=(400, 400)
        )
        self.Bind(wx.EVT_ERASE_BACKGROUND, lambda x: None)
        self.Bind(wx.EVT_PAINT, self.OnPaint)

    def OnPaint(self, evt):
        width, height = self.GetClientSize()

        text = 'Alpha test'
        font = self.GetFont()
        font.SetPointSize(font.GetPointSize() + 16)
        font = font.MakeBold()
        font = font.MakeItalic()

        bmp = wx.Bitmap(width, height)
        bmp2 = wx.Bitmap(width, height)
        bmp3 = wx.Bitmap(width, height)

        dc = wx.MemoryDC()

        dc.SelectObject(bmp3)
        dc.SetTextForeground(wx.Colour(255, 255, 255, 255))
        dc.SetFont(font)

        text_width, text_height = dc.GetFullTextExtent(text)[:2]

        text_x = (width / 2) - (text_width / 2)
        text_y = (height / 2) - (text_height / 2)

        dc.DrawText(text, text_x, text_y)

        dc.SelectObject(bmp2)

        dc.SetPen(wx.Pen(wx.Colour(255, 255, 255, 255), 6))
        dc.SetBrush(wx.Brush(wx.Colour(255, 255, 255, 255)))
        dc.DrawRoundedRectangle(103, 78, width - 200 - 3, height - 150 - 3, 5)

        dc.SelectObject(bmp)
        gc = wx.GraphicsContext.Create(dc)
        gcdc = wx.GCDC(gc)


        region1 = wx.Region(bmp)
        region2 = wx.Region(bmp2, wx.Colour(0, 0, 0, 0))
        region1.Subtract(region2)

        gcdc.SetDeviceClippingRegion(region1)
        gc.SetPen(wx.Pen(wx.Colour(255, 0, 0, 140), 6))
        gc.SetBrush(wx.Brush(wx.Colour(0, 0, 0, 150)))
        gc.DrawRoundedRectangle(3, 3, width-6, height-6, 5)

        gcdc.DestroyClippingRegion()

        gc.SetPen(wx.Pen(wx.Colour(255, 0, 0, 120), 6))
        gc.SetBrush(wx.Brush(wx.Colour(0, 0, 0, 0)))
        gc.DrawRoundedRectangle(103, 78, width - 200 - 3, height - 150 - 3, 5)

        region1 = wx.Region(bmp)
        region2 = wx.Region(bmp3, wx.Colour(0, 0, 0, 0))
        region1.Subtract(region2)
        gcdc.SetDeviceClippingRegion(region1)
        gcdc.SetTextForeground(wx.Colour(0, 0, 0, 130))
        gcdc.SetTextBackground(wx.TransparentColour)
        gcdc.SetFont(font)
        gc.DrawText(text, text_x - 4, text_y - 4)
        gcdc.DestroyClippingRegion()

        gcdc.SetTextForeground(wx.Colour(0, 255, 0, 150))
        gcdc.SetTextBackground(wx.TransparentColour)
        gc.DrawText(text, text_x, text_y)

        gcdc.Destroy()
        del gcdc

        dc.SelectObject(wx.NullBitmap)
        dc.Destroy()
        del dc

        region = wx.Region(bmp)
        self.SetShape(region)

        self.draw_alpha(bmp)

    def draw_alpha(self, bmp):
        hndl = self.GetHandle()
        style = GetWindowLongW(HWND(hndl), INT(GWL_EXSTYLE))
        SetWindowLongW(HWND(hndl), INT(GWL_EXSTYLE), LONG(style | WS_EX_LAYERED))

        hdcDst = GetDC(GetDesktopWindow())
        hdcSrc = CreateCompatibleDC(HDC(hdcDst))

        pptDst = POINT(*self.GetPosition())
        psize = SIZE(*self.GetClientSize())
        pptSrc = POINT(0, 0)
        crKey = RGB(0, 0, 0)

        pblend = BLENDFUNCTION(AC_SRC_OVER, 0, 255, AC_SRC_ALPHA)

        SelectObject(HDC(hdcSrc), HGDIOBJ(bmp.GetHandle()))
        UpdateLayeredWindow(
            HWND(hndl),
            HDC(hdcDst),
            ctypes.byref(pptDst),
            ctypes.byref(psize),
            HDC(hdcSrc),
            ctypes.byref(pptSrc),
            crKey,
            ctypes.byref(pblend),
            DWORD(ULW_ALPHA)
        )


app = wx.App()

frame = Frame()
frame.Show()
app.MainLoop()

@Metallicow Here is an example how how to overcome the alpha issue with shaped frames, this example only works on Windows. I would think that there are similiar API functions for OSX and Linux that can be used to achieve the same results

Operating system: Windows 10 21H1 (x64) build 19043.1586

wxPython version & source:
Pypi (attempting) Python version & source: Stock Description of the problem: WXPython 4.11 doesn't install on Windows in Python 3.10. This seems to have been fixed in #2017, but the wheels haven't been pushed yet. It would be great if this could be done.

ThumbnailCtrl is more of a image browser demo application than a widget, in that it reads files from a directory, selects which files to display, deletes files, displays the source directory path in a text ctrl, etc. This makes it unlikely that it could be used in any other application, for example, to provide thumbnails of files with different file types than the ones hard-coded in the class.

ThumbnailCtrl delegates most of its operations to ScrolledThumbnail which actually implements a scrolled window of thumbnails, a Thumb class, which contains information about a thumbnail, and an ImageHandler class, which manipulates images. There was poor isolation of functionality between these classes, violating object-oriented design, with one class making changes to the internal data of another class. Additionally, there was substantial non-functional code, as well as code which did not function correctly.

This refactoring maintains the functionality and interfaces of ThumbnailCtrl, except for those which were unused. Existing uses of the thumbnailctrl package should work without modification. A new package, scrolledthumbnail, contains the functionality for a scrolled window containing thumbnails, an extendable Thumb class, and image manipulation classes. The scrolledthumbnail package can be used in other applications, independent of the ThumbnailCtrl class, and without the functional restrictions of that application.

Detailed changes:

ThumbnailCtrl.py (demo program):

• Always import from wx.lib.agw
• Optional code to use PIL instead of native image handling
• Add setting for thumbnail width and height
• Increase size of demo window

thumbnailctrl.py:

• Move Thumb, ScrolledThumbnail, ImageHandler to scrolledthumbnail.py
• Remove EVT_THUMBNAILS_CAPTION_CHANGED (unused)
• Add EVT_THUMBNAILS_CHAR to respond to keystrokes
• Remove image processing code
• Add scrolling dialog for delete files
• Move directory processing from ScrolledThumbnail
• Move file delete processing from ScrolledThumbnail
• List all files to be deleted in scrolling dialog
• Remove unused or unimplemented methods and options

scrolledthumbnail.py:

• Move Thumb, ScrolledThumbnail, ImageHander classes from thumbnailctrl.py
• Add documentation for ScrolledThumbnail widget
• Add example program which does not use ThumbnailCtrl
• New EVT_THUMBNAILS_CHAR event for key press
• Remove unused options and dead code
• Add Rotate() to PILImageHandler and NativeImageHandler
• Throw event EVT_THUMBNAILS_CHAR for keystroke on thumbnail
• Fix failure to rotate images correctly
• Redisplay window when thumb size changed
• Simplify logic
• Remove popup dialog when rotating images

Fixes #NNNN

Operating system: wxPython version & source: 4.0.7.post1 msw (phoenix) wxWidgets 3.0.5 (pypi) Python version & source: 3.7.5 Stackless 3.7 (tags/v3.7.5-slp:f7925f2a02, Oct 20 2019, 15:28:53) [MSC v.1916 64 bit (AMD64)]

Description of the problem: I am getting an application crash I am not sure how I would recreate this application crash it appears to be an internal issue. Here is the information I do have on the application crash on the off chance it may help.

Problem signature:
  Problem Event Name:	APPCRASH
  Application Name:	python.exe
  Application Version:	3.7.5150.1013
  Application Timestamp:	5dac6199
  Fault Module Name:	wxmsw30u_core_vc140_x64.dll
  Fault Module Version:	3.0.5.0
  Fault Module Timestamp:	5db79a16
  Exception Code:	c0000005
  Exception Offset:	00000000000394a0
  OS Version:	6.1.7601.2.1.0.256.1
  Locale ID:	1033
  Additional Information 1:	705e
  Additional Information 2:	705e6db06b5e83c9a4a9aa840488fd7b
  Additional Information 3:	c57a
  Additional Information 4:	c57aeafb8b973b3f380f9b5f6b3079f3

Here is the stack trace

wxmsw30u_core_vc140_x64.dll!wxGDIObject::IsOk() Line 49
	at c:\projects\bb2\dist-win64-py37\build\ext\wxwidgets\include\wx\gdiobj.h(49)
wxmsw30u_core_vc140_x64.dll!wxMSWDCImpl::SetPen(const wxPen & pen={...}) Line 1666
	at c:\projects\bb2\dist-win64-py37\build\ext\wxwidgets\src\msw\dc.cpp(1666)
[Inline Frame] wxmsw30u_core_vc140_x64.dll!wxMemoryDCImpl::Init() Line 72
	at c:\projects\bb2\dist-win64-py37\build\ext\wxwidgets\src\msw\dcmemory.cpp(72)
wxmsw30u_core_vc140_x64.dll!wxMemoryDCImpl::wxMemoryDCImpl(wxMemoryDC * owner) Line 46
	at c:\projects\bb2\dist-win64-py37\build\ext\wxwidgets\src\msw\dcmemory.cpp(46)
wxmsw30u_core_vc140_x64.dll!wxNativeDCFactory::CreateMemoryDC(wxMemoryDC * owner=0x00000000026ea7e0) Line 156
	at c:\projects\bb2\dist-win64-py37\build\ext\wxwidgets\src\common\dcbase.cpp(156)
wxmsw30u_core_vc140_x64.dll!wxMemoryDC::wxMemoryDC() Line 221
	at c:\projects\bb2\dist-win64-py37\build\ext\wxwidgets\src\common\dcbase.cpp(221)
_core.cp37-win_amd64.pyd!000007fed342316d()
siplib.cp37-win_amd64.pyd!000007fef7fe526f()
python37.dll!000007fedef5bb3a()
python37.dll!000007fedef5b858()
python37.dll!000007fedef44090()
python37.dll!000007fedef44c10()
python37.dll!000007fedef3d865()
python37.dll!000007fedef44e21()
python37.dll!000007fedef3d865()
python37.dll!000007fedef44e21()
python37.dll!000007fedef3d865()
python37.dll!000007fedef44e21()
python37.dll!000007fedef3d865()
python37.dll!000007fedef4620b()
python37.dll!000007fedef3d865()
python37.dll!000007fedef44e21()
python37.dll!000007fedef3d865()
python37.dll!000007fedef44e21()
python37.dll!000007fedef3d865()
python37.dll!000007fedef3d8d5()
python37.dll!000007fedef2f3e0()
python37.dll!000007fedef2efe9()
python37.dll!000007fedef2ef0c()
python37.dll!000007fedef2ee23()
python37.dll!000007fedef2eeb8()
python37.dll!000007fedef3dfd7()
python37.dll!000007fedef3d984()
python37.dll!000007fedef3d7a6()
python37.dll!000007fedef30677()
python37.dll!000007fedf02d84a()
python37.dll!000007fedf0ceaae()
ucrtbase.dll!thread_start<unsigned int (__cdecl*)(void * __ptr64)>()
kernel32.dll!BaseThreadInitThunk()
ntdll.dll!RtlUserThreadStart()

And here is the minidump without the heap.

debug.zip

If there is anything else I can provide let me know.

Operating system: Ubuntu 17.10 wxPython version: 4.0.1 Stock or custom build: Stock Python version: 3.6.3 Stock or custom build: Stock

Description of the problem: When using ClientDC, the screen content is not updated. It will only update with a large delay or on resizing etc. As workaround, an additional Refresh() solves the problem. Switching from Wayland to X also solves the problem.

The oxboxes Ubuntu 17.10 VM is fine for reproducing the issue.

For verification, try the ScrolledWindow.py demo with BUFFERED = False. On Python 2.7 / wxPython 3.0.2 (gtk3.0) everything works fine. On Python 3.6 / wxPython 4.0.1, when drawing with the mouse, the screen is not updated before it is resized.

This was reported on wxpython-dev by Riccardo Borgani who has problems with the Matplotlib WxAgg backend: https://groups.google.com/d/msg/wxpython-dev/8E4jtTjEmjI/5H3CboaNAAAJ

When trying with Python 2.7 and wxPython 3.0.2 (gtk3.0) his example worked as expected.

OK I am trying to draw a rounded rectangle that has a gradient inside of it. the rectangle to 300x150 and the gradient is going to go from red to transparent. I have attached an image that shows what I am looking to do. For the life of me I cannot figure out ho to go about making the gradient. I tried DC.GradientFillConcentric and this only drew a gradient circle in the middle. The name of this function is misleading. It should be GradientCircleConcentric not fill. fill leads you to believe that it fills the whole rect not just making a circle. I would have thought there would be a simple method that can be used maybe a blending mode and making a really wide line. IDK I can't find an easy way, I also tried googling for an example and came up with a single mailing list entry for someone asking the exact same thing. they were given a link to wxWidgets API docs specifically the wxGraphicsContext portion of it. and the user only said "It works!" and didn't provide any kind of an example. So I am going to make the assumption that what I need is in there I am not sure how to go about writing the code.

If someone can shed some light on this for me it would be appreciated. Thank you for any assistance you can offer. Kevin.

This commit fixes building Phoenix with SIP 4.19.14. One of the main changes in this release was to add SIP_OVERRIDE, which adds the C++ override keyword to method declarations that are intended to override the C++ class that SIP is wrapping. Unfortunately, this exposed a few bugs which caused compile errors. Most of the fixes are to the interface headers. The two trickier fixes were to wxFileConfig and wxRendererNative.

For wxFileConfig, the Save method's second parameter, 'conv', had been ignored. This caused the override check to fail. This was resolved by ignoring the auto-generated Save() and adding a manually generated one without the second parameter.

For wxRendererNative, the DrawTitleBarBitmap method is actually pure virtual in the subclass, so the fix was to ignore it there. In the subclass wxDelegateRendererNative, it is concrete, but only on certain platforms. This was fixed in a similar way by adding a manually generated method that will do the right thing on the platforms that support it.

There is one other fix required for SIP 4.19.14: SIP has now added its own wrapper for size_t, so it required removing the one in wacky_ints. This change was omitted for now because it should probably wait until Phoenix officially moves to 4.19.14.

# coding=utf-8
import wx
import sys
import datetime

if __name__ == "__main__":
    print("wxpython version:", wx.version())
    print("Python version:", sys.version)
    print("Run before wx:", datetime.datetime.strptime("02/02/2020", '%d/%m/%Y'), "normal")
    app = wx.App()
    print("Run after wx:", datetime.datetime.strptime("02/02/2020", '%d/%m/%Y'), "error")

    # frame = MainFrame()
    # frame.SetSize(0, 0, 1200, 750)
    # frame.Center()
    # frame.Show()
    app.MainLoop()

wxpython version: 4.1.0 msw (phoenix) wxWidgets 3.1.4
Python version: 3.6.8 (tags/v3.6.8:3c6b436a57, Dec 24 2018, 00:16:47) [MSC v.1916 64 bit (AMD64)]
Run before wx: 2020-02-02 00:00:00 normal
Traceback (most recent call last):
  File "K:/test/a.py", line 14, in <module>
    print("Run after wx:", datetime.datetime.strptime("02/02/2020", '%d/%m/%Y'), "error")
  File "C:\Program Files\Python36\lib\_strptime.py", line 565, in _strptime_datetime
    tt, fraction = _strptime(data_string, format)
  File "C:\Program Files\Python36\lib\_strptime.py", line 334, in _strptime
    if (_getlang() != locale_time.lang or
  File "C:\Program Files\Python36\lib\_strptime.py", line 31, in _getlang
    return locale.getlocale(locale.LC_TIME)
  File "C:\Program Files\Python36\lib\locale.py", line 581, in getlocale
    return _parse_localename(localename)
  File "C:\Program Files\Python36\lib\locale.py", line 490, in _parse_localename
    raise ValueError('unknown locale: %s' % localename)
ValueError: unknown locale: zh-CN

I wrote a custom slider widget I thought might be of interest. It handles floats as well as integers, a step or increment can also be supplied. If it is something you might want to add you are more then welcome to. It is currently modeled after the slider in Windows, I can add other OS's into that as well.

I have attached the script, just run the script and the test program will run displaying an assortment of varying sliders.

If someone finds a bug please let me know so I can correct it.

AGWSlider.zip

When trying to install wxpython following instructions in travis, it fails in the installation, essentially the following execution fails:

pip install -U wxpython

Operating system: Virtual machine in travis wxPython version: latest available in pip Stock or custom build: Python version: 3.6.2 Stock or custom build:

Description of the problem:

Essentially when installing wxpython I got the following error

$ pip install -U wxpython Collecting wxpython Downloading wxPython-4.0.0b1.tar.gz (50.6MB) Requirement already up-to-date: six in /home/travis/virtualenv/python3.6.2/lib/python3.6/site-packages (from wxpython) Building wheels for collected packages: wxpython Running setup.py bdist_wheel for wxpython: started Running setup.py bdist_wheel for wxpython: finished with status 'error' Complete output from command /home/travis/virtualenv/python3.6.2/bin/python -u -c "import setuptools, tokenize;file='/tmp/pip-build-2evi4tjt/wxpython/setup.py';f=getattr(tokenize, 'open', open)(file);code=f.read().replace('\r\n', '\n');f.close();exec(compile(code, file, 'exec'))" bdist_wheel -d /tmp/tmp98rhij4_pip-wheel- --python-tag cp36: running bdist_wheel running build WARNING: Building this way assumes that all generated files have been generated already. If that is not the case then use build.py directly to generate the source and perform the build stage. You can use --skip-build with the bdist_* or install commands to avoid this message and the wxWidgets and Phoenix build steps in the future.

"/home/travis/virtualenv/python3.6.2/bin/python" -u build.py build Will build using: "/home/travis/virtualenv/python3.6.2/bin/python" 3.6.2 (default, Jul 17 2017, 15:25:33) [GCC 4.8.4] Python's architecture is 64bit cfg.VERSION: 4.0.0b1

Running command: build Running command: build_wx wxWidgets build options: ['--wxpython', '--unicode'] Configure options: ['--enable-unicode', '--with-opengl', '--enable-sound', '--enable-graphics_ctx', '--enable-mediactrl', '--enable-display', '--enable-geometry', '--enable-debug_flag', '--enable-optimise', '--disable-debugreport', '--enable-uiactionsim', '--with-sdl'] /tmp/pip-build-2evi4tjt/wxpython/ext/wxWidgets/configure --enable-unicode --with-opengl --enable-sound --enable-graphics_ctx --enable-mediactrl --enable-display --enable-geometry --enable-debug_flag --enable-optimise --disable-debugreport --enable-uiactionsim --with-sdl checking build system type... x86_64-unknown-linux-gnu checking host system type... x86_64-unknown-linux-gnu checking for --disable-gui... no checking for --enable-monolithic... no checking for --enable-plugins... no checking for --without-subdirs... no checking for --enable-official_build... no checking for --disable-all-features... no checking for --enable-universal... no checking for --enable-nanox... no checking for --enable-gpe... no checking for toolkit... gtk checking for --with-libpng... yes checking for --with-libjpeg... yes checking for --with-libtiff... yes checking for --without-libjbig... no checking for --without-liblzma... no checking for --with-libxpm... yes checking for --with-libiconv... yes checking for --with-libmspack... no checking for --without-gtkprint... no checking for --with-gnomevfs... no checking for --with-libnotify... yes checking for --with-hildon... no checking for --with-opengl... yes checking for --with-dmalloc... no checking for --with-sdl... yes checking for --with-regex... yes checking for --with-zlib... yes checking for --with-expat... yes checking for --with-macosx-sdk... checking for --with-macosx-version-min... checking for --enable-debug... default checking for --disable-debug_flag... no checking for --enable-debug_info... no checking for --enable-debug_gdb... no checking for --enable-debug_cntxt... no checking for --enable-mem_tracing... no checking for --disable-shared... no checking for --enable-stl... no checking for --enable-std_containers... no checking for --enable-std_iostreams... yes checking for --enable-std_string... yes checking for --enable-std_string_conv_in_wxstring... no checking for --disable-unicode... no checking for --enable-mslu... no checking for --enable-utf8... no checking for --enable-utf8only... no checking for --enable-extended_rtti... no checking for --disable-optimise... no checking for --enable-profile... no checking for --enable-no_rtti... no checking for --enable-no_exceptions... no checking for --enable-permissive... no checking for --enable-no_deps... no checking for --disable-vararg_macros... no checking for --enable-universal_binary... no checking for --enable-macosx_arch... no checking for --enable-compat26... no checking for --disable-compat28... no checking for --disable-rpath... no checking for --enable-objc_uniquifying... no checking for --disable-visibility... no checking for --disable-tls... no checking for --enable-intl... yes checking for --enable-xlocale... yes checking for --enable-config... yes checking for --enable-protocols... yes checking for --enable-ftp... yes checking for --enable-http... yes checking for --enable-fileproto... yes checking for --enable-sockets... yes checking for --enable-ipv6... no checking for --enable-ole... yes checking for --enable-dataobj... yes checking for --enable-ipc... yes checking for --enable-baseevtloop... yes checking for --enable-epollloop... yes checking for --enable-selectloop... yes checking for --enable-any... yes checking for --enable-apple_ieee... yes checking for --enable-arcstream... yes checking for --enable-base64... yes checking for --enable-backtrace... yes checking for --enable-catch_segvs... yes checking for --enable-cmdline... yes checking for --enable-datetime... yes checking for --enable-debugreport... no checking for --enable-dialupman... yes checking for --enable-dynlib... yes checking for --enable-dynamicloader... yes checking for --enable-exceptions... yes checking for --enable-ffile... yes checking for --enable-file... yes checking for --enable-filehistory... yes checking for --enable-filesystem... yes checking for --enable-fontenum... yes checking for --enable-fontmap... yes checking for --enable-fs_archive... yes checking for --enable-fs_inet... yes checking for --enable-fs_zip... yes checking for --enable-fsvolume... yes checking for --enable-fswatcher... yes checking for --enable-geometry... yes checking for --enable-log... yes checking for --enable-longlong... yes checking for --enable-mimetype... yes checking for --enable-printfposparam... yes checking for --enable-snglinst... yes checking for --enable-sound... yes checking for --enable-stdpaths... yes checking for --enable-stopwatch... yes checking for --enable-streams... yes checking for --enable-sysoptions... yes checking for --enable-tarstream... yes checking for --enable-textbuf... yes checking for --enable-textfile... yes checking for --enable-timer... yes checking for --enable-variant... yes checking for --enable-zipstream... yes checking for --enable-url... yes checking for --enable-protocol... yes checking for --enable-protocol_http... yes checking for --enable-protocol_ftp... yes checking for --enable-protocol_file... yes checking for --enable-threads... yes checking for --enable-iniconf... no checking for --enable-regkey... yes checking for --enable-docview... yes checking for --enable-help... yes checking for --enable-mshtmlhelp... yes checking for --enable-html... yes checking for --enable-htmlhelp... yes checking for --enable-xrc... yes checking for --enable-aui... yes checking for --enable-propgrid... yes checking for --enable-ribbon... yes checking for --enable-stc... yes checking for --enable-constraints... yes checking for --enable-loggui... yes checking for --enable-logwin... yes checking for --enable-logdialog... yes checking for --enable-mdi... yes checking for --enable-mdidoc... yes checking for --enable-mediactrl... yes checking for --enable-gstreamer8... no checking for --enable-richtext... yes checking for --enable-postscript... yes checking for --enable-printarch... yes checking for --enable-svg... yes checking for --enable-webkit... yes checking for --enable-webview... yes checking for --enable-graphics_ctx... yes checking for --enable-clipboard... yes checking for --enable-dnd... yes checking for --disable-controls... no checking for --enable-markup... yes checking for --enable-accel... yes checking for --enable-animatectrl... yes checking for --enable-bannerwindow... yes checking for --enable-artstd... yes checking for --enable-arttango... auto checking for --enable-bmpbutton... yes checking for --enable-bmpcombobox... yes checking for --enable-button... yes checking for --enable-calendar... yes checking for --enable-caret... yes checking for --enable-checkbox... yes checking for --enable-checklst... yes checking for --enable-choice... yes checking for --enable-choicebook... yes checking for --enable-collpane... yes checking for --enable-colourpicker... yes checking for --enable-combobox... yes checking for --enable-comboctrl... yes checking for --enable-commandlinkbutton... yes checking for --enable-dataviewctrl... yes checking for --enable-datepick... yes checking for --enable-detect_sm... yes checking for --enable-dirpicker... yes checking for --enable-display... yes checking for --enable-editablebox... yes checking for --enable-filectrl... yes checking for --enable-filepicker... yes checking for --enable-fontpicker... yes checking for --enable-gauge... yes checking for --enable-grid... yes checking for --enable-headerctrl... yes checking for --enable-hyperlink... yes checking for --enable-imaglist... yes checking for --enable-infobar... yes checking for --enable-listbook... yes checking for --enable-listbox... yes checking for --enable-listctrl... yes checking for --enable-notebook... yes checking for --enable-notifmsg... yes checking for --enable-odcombobox... yes checking for --enable-popupwin... yes checking for --enable-prefseditor... yes checking for --enable-radiobox... yes checking for --enable-radiobtn... yes checking for --enable-richmsgdlg... yes checking for --enable-richtooltip... yes checking for --enable-rearrangectrl... yes checking for --enable-sash... yes checking for --enable-scrollbar... yes checking for --enable-searchctrl... yes checking for --enable-slider... yes checking for --enable-spinbtn... yes checking for --enable-spinctrl... yes checking for --enable-splitter... yes checking for --enable-statbmp... yes checking for --enable-statbox... yes checking for --enable-statline... yes checking for --enable-stattext... yes checking for --enable-statusbar... yes checking for --enable-taskbaricon... yes checking for --enable-tbarnative... yes checking for --enable-textctrl... yes checking for --enable-datepick... yes checking for --enable-tipwindow... yes checking for --enable-togglebtn... yes checking for --enable-toolbar... yes checking for --enable-toolbook... yes checking for --enable-treebook... yes checking for --enable-treectrl... yes checking for --enable-treelist... yes checking for --enable-commondlg... yes checking for --enable-aboutdlg... yes checking for --enable-choicedlg... yes checking for --enable-coldlg... yes checking for --enable-filedlg... yes checking for --enable-finddlg... yes checking for --enable-fontdlg... yes checking for --enable-dirdlg... yes checking for --enable-msgdlg... yes checking for --enable-numberdlg... yes checking for --enable-splash... yes checking for --enable-textdlg... yes checking for --enable-tipdlg... yes checking for --enable-progressdlg... yes checking for --enable-wizarddlg... yes checking for --enable-menus... yes checking for --enable-miniframe... yes checking for --enable-tooltips... yes checking for --enable-splines... yes checking for --enable-mousewheel... yes checking for --enable-validators... yes checking for --enable-busyinfo... yes checking for --enable-hotkey... auto checking for --enable-joystick... yes checking for --enable-metafile... auto checking for --enable-dragimage... yes checking for --enable-accessibility... no checking for --enable-uiactionsim... yes checking for --enable-dctransform... yes checking for --enable-webviewwebkit... yes checking for --enable-palette... yes checking for --enable-image... yes checking for --enable-gif... yes checking for --enable-pcx... yes checking for --enable-tga... yes checking for --enable-iff... yes checking for --enable-pnm... yes checking for --enable-xpm... yes checking for --enable-ico_cur... yes checking for --enable-dccache... yes checking for --enable-ps-in-msw... yes checking for --enable-ownerdrawn... yes checking for --enable-uxtheme... yes checking for --enable-wxdib... yes checking for --enable-webviewie... yes checking for --enable-autoidman... no checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking whether we are using the Intel C compiler... no checking how to run the C preprocessor... gcc -E checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking whether gcc needs -traditional... no checking for g++... g++ checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking whether we are using the Intel C++ compiler... no checking whether we are using the Sun C++ compiler... no checking for ar... ar checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for langinfo.h... yes checking for wchar.h... yes checking for sys/select.h... yes checking for cxxabi.h... yes checking for an ANSI C-conforming const... yes checking for inline... inline checking size of short... 2 checking size of void *... 8 checking size of int... 4 checking size of long... 8 checking size of size_t... 8 checking size of long long... 8 checking size of wchar_t... 4 checking for va_copy... yes checking whether the compiler supports variadic macros... yes checking for _FILE_OFFSET_BITS value needed for large files... 64 checking if large file support is available... yes checking for _LARGEFILE_SOURCE value needed for large files... no checking whether byte ordering is bigendian... no checking for iostream... yes checking if C++ compiler supports the explicit keyword... yes checking for std::wstring in ... yes checking for std::istream... yes checking for std::ostream... yes checking how to run the C++ preprocessor... g++ -E checking type_traits usability... no checking type_traits presence... no checking for type_traits... no checking tr1/type_traits usability... yes checking tr1/type_traits presence... yes checking for tr1/type_traits... yes checking for __sync_fetch_and_add and __sync_sub_and_fetch builtins... yes checking for libraries directories... /usr/lib/x86_64-linux-gnu /usr/lib checking for cos... no checking for floor... no checking if floating point functions link without -lm... no checking for sin... yes checking for ceil... yes checking if floating point functions link with -lm... yes checking for strtoull... yes configure: WARNING: Defaulting to the builtin regex library for Unicode build. checking for zlib.h >= 1.1.4... yes checking for zlib.h... (cached) yes checking for deflate in -lz... yes checking for png.h > 0.90... yes checking for png.h... (cached) yes checking for png_sig_cmp in -lpng... yes checking for jpeglib.h... yes checking for jpeg_read_header in -ljpeg... yes checking for tiffio.h... yes checking for TIFFError in -ltiff... yes checking for expat.h... yes checking if expat.h is valid C++ header... yes checking for XML_ParserCreate in -lexpat... yes checking for GTK+ version... checking for pkg-config... /usr/bin/pkg-config checking for GTK+ - version >= 2.6.0... no *** Could not run GTK+ test program, checking why... *** The test program failed to compile or link. See the file config.log for the *** exact error that occurred. This usually means GTK+ is incorrectly installed. checking for pkg-config... (cached) /usr/bin/pkg-config checking for GTK+ - version >= 3.0.0... no *** Could not run GTK+ test program, checking why... *** The test program failed to compile or link. See the file config.log for the *** exact error that occured. This usually means GTK+ is incorrectly installed. checking for gtk-config... no checking for GTK - version >= 1.2.7... no *** The gtk-config script installed by GTK could not be found *** If GTK was installed in PREFIX, make sure PREFIX/bin is in *** your path, or set the GTK_CONFIG environment variable to the *** full path to gtk-config. checking for gtk-config... (cached) no checking for GTK - version >= 1.2.3... no *** The gtk-config script installed by GTK could not be found *** If GTK was installed in PREFIX, make sure PREFIX/bin is in *** your path, or set the GTK_CONFIG environment variable to the *** full path to gtk-config. configure: error: The development files for GTK+ were not found. For GTK+ 2, please ensure that pkg-config is in the path and that gtk+-2.0.pc is installed. For GTK+ 1.2 please check that gtk-config is in the path, and that the version is 1.2.3 or above. Also check that the libraries returned by 'pkg-config gtk+-2.0 --libs' or 'gtk-config --libs' are in the LD_LIBRARY_PATH or equivalent.

Error running configure ERROR: failed building wxWidgets Traceback (most recent call last): File "build.py", line 1259, in cmd_build_wx wxbuild.main(wxDir(), build_options) File "/tmp/pip-build-2evi4tjt/wxpython/buildtools/build_wxwidgets.py", line 368, in main "Error running configure") File "/tmp/pip-build-2evi4tjt/wxpython/buildtools/build_wxwidgets.py", line 85, in exitIfError raise builder.BuildError(msg) buildtools.builder.BuildError: Error running configure Finished command: build_wx (0m12.721s) Finished command: build (0m12.721s) Command '"/home/travis/virtualenv/python3.6.2/bin/python" -u build.py build' failed with exit code 1.

Failed building wheel for wxpython Running setup.py clean for wxpython Failed to build wxpython Installing collected packages: wxpython Running setup.py install for wxpython: started Running setup.py install for wxpython: finished with status 'error' Complete output from command /home/travis/virtualenv/python3.6.2/bin/python -u -c "import setuptools, tokenize;file='/tmp/pip-build-2evi4tjt/wxpython/setup.py';f=getattr(tokenize, 'open', open)(file);code=f.read().replace('\r\n', '\n');f.close();exec(compile(code, file, 'exec'))" install --record /tmp/pip-ykt87at0-record/install-record.txt --single-version-externally-managed --compile --install-headers /home/travis/virtualenv/python3.6.2/include/site/python3.6/wxpython: running install running build WARNING: Building this way assumes that all generated files have been generated already. If that is not the case then use build.py directly to generate the source and perform the build stage. You can use --skip-build with the bdist_* or install commands to avoid this message and the wxWidgets and Phoenix build steps in the future.

"/home/travis/virtualenv/python3.6.2/bin/python" -u build.py build
Will build using: "/home/travis/virtualenv/python3.6.2/bin/python"
3.6.2 (default, Jul 17 2017, 15:25:33)
[GCC 4.8.4]
Python's architecture is 64bit
cfg.VERSION: 4.0.0b1

Running command: build
Running command: build_wx
wxWidgets build options: ['--wxpython', '--unicode']
Configure options: ['--enable-unicode', '--with-opengl', '--enable-sound', '--enable-graphics_ctx', '--enable-mediactrl', '--enable-display', '--enable-geometry', '--enable-debug_flag', '--enable-optimise', '--disable-debugreport', '--enable-uiactionsim', '--with-sdl']
/tmp/pip-build-2evi4tjt/wxpython/ext/wxWidgets/configure --enable-unicode --with-opengl --enable-sound --enable-graphics_ctx --enable-mediactrl --enable-display --enable-geometry --enable-debug_flag --enable-optimise --disable-debugreport --enable-uiactionsim --with-sdl
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking for --disable-gui... no
checking for --enable-monolithic... no
checking for --enable-plugins... no
checking for --without-subdirs... no
checking for --enable-official_build... no
checking for --disable-all-features... no
checking for --enable-universal... no
checking for --enable-nanox... no
checking for --enable-gpe... no
checking for toolkit... gtk
checking for --with-libpng... yes
checking for --with-libjpeg... yes
checking for --with-libtiff... yes
checking for --without-libjbig... no
checking for --without-liblzma... no
checking for --with-libxpm... yes
checking for --with-libiconv... yes
checking for --with-libmspack... no
checking for --without-gtkprint... no
checking for --with-gnomevfs... no
checking for --with-libnotify... yes
checking for --with-hildon... no
checking for --with-opengl... yes
checking for --with-dmalloc... no
checking for --with-sdl... yes
checking for --with-regex... yes
checking for --with-zlib... yes
checking for --with-expat... yes
checking for --with-macosx-sdk...
checking for --with-macosx-version-min...
checking for --enable-debug... default
checking for --disable-debug_flag... no
checking for --enable-debug_info... no
checking for --enable-debug_gdb... no
checking for --enable-debug_cntxt... no
checking for --enable-mem_tracing... no
checking for --disable-shared... no
checking for --enable-stl... no
checking for --enable-std_containers... no
checking for --enable-std_iostreams... yes
checking for --enable-std_string... yes
checking for --enable-std_string_conv_in_wxstring... no
checking for --disable-unicode... no
checking for --enable-mslu... no
checking for --enable-utf8... no
checking for --enable-utf8only... no
checking for --enable-extended_rtti... no
checking for --disable-optimise... no
checking for --enable-profile... no
checking for --enable-no_rtti... no
checking for --enable-no_exceptions... no
checking for --enable-permissive... no
checking for --enable-no_deps... no
checking for --disable-vararg_macros... no
checking for --enable-universal_binary... no
checking for --enable-macosx_arch... no
checking for --enable-compat26... no
checking for --disable-compat28... no
checking for --disable-rpath... no
checking for --enable-objc_uniquifying... no
checking for --disable-visibility... no
checking for --disable-tls... no
checking for --enable-intl... yes
checking for --enable-xlocale... yes
checking for --enable-config... yes
checking for --enable-protocols... yes
checking for --enable-ftp... yes
checking for --enable-http... yes
checking for --enable-fileproto... yes
checking for --enable-sockets... yes
checking for --enable-ipv6... no
checking for --enable-ole... yes
checking for --enable-dataobj... yes
checking for --enable-ipc... yes
checking for --enable-baseevtloop... yes
checking for --enable-epollloop... yes
checking for --enable-selectloop... yes
checking for --enable-any... yes
checking for --enable-apple_ieee... yes
checking for --enable-arcstream... yes
checking for --enable-base64... yes
checking for --enable-backtrace... yes
checking for --enable-catch_segvs... yes
checking for --enable-cmdline... yes
checking for --enable-datetime... yes
checking for --enable-debugreport... no
checking for --enable-dialupman... yes
checking for --enable-dynlib... yes
checking for --enable-dynamicloader... yes
checking for --enable-exceptions... yes
checking for --enable-ffile... yes
checking for --enable-file... yes
checking for --enable-filehistory... yes
checking for --enable-filesystem... yes
checking for --enable-fontenum... yes
checking for --enable-fontmap... yes
checking for --enable-fs_archive... yes
checking for --enable-fs_inet... yes
checking for --enable-fs_zip... yes
checking for --enable-fsvolume... yes
checking for --enable-fswatcher... yes
checking for --enable-geometry... yes
checking for --enable-log... yes
checking for --enable-longlong... yes
checking for --enable-mimetype... yes
checking for --enable-printfposparam... yes
checking for --enable-snglinst... yes
checking for --enable-sound... yes
checking for --enable-stdpaths... yes
checking for --enable-stopwatch... yes
checking for --enable-streams... yes
checking for --enable-sysoptions... yes
checking for --enable-tarstream... yes
checking for --enable-textbuf... yes
checking for --enable-textfile... yes
checking for --enable-timer... yes
checking for --enable-variant... yes
checking for --enable-zipstream... yes
checking for --enable-url... yes
checking for --enable-protocol... yes
checking for --enable-protocol_http... yes
checking for --enable-protocol_ftp... yes
checking for --enable-protocol_file... yes
checking for --enable-threads... yes
checking for --enable-iniconf... no
checking for --enable-regkey... yes
checking for --enable-docview... yes
checking for --enable-help... yes
checking for --enable-mshtmlhelp... yes
checking for --enable-html... yes
checking for --enable-htmlhelp... yes
checking for --enable-xrc... yes
checking for --enable-aui... yes
checking for --enable-propgrid... yes
checking for --enable-ribbon... yes
checking for --enable-stc... yes
checking for --enable-constraints... yes
checking for --enable-loggui... yes
checking for --enable-logwin... yes
checking for --enable-logdialog... yes
checking for --enable-mdi... yes
checking for --enable-mdidoc... yes
checking for --enable-mediactrl... yes
checking for --enable-gstreamer8... no
checking for --enable-richtext... yes
checking for --enable-postscript... yes
checking for --enable-printarch... yes
checking for --enable-svg... yes
checking for --enable-webkit... yes
checking for --enable-webview... yes
checking for --enable-graphics_ctx... yes
checking for --enable-clipboard... yes
checking for --enable-dnd... yes
checking for --disable-controls... no
checking for --enable-markup... yes
checking for --enable-accel... yes
checking for --enable-animatectrl... yes
checking for --enable-bannerwindow... yes
checking for --enable-artstd... yes
checking for --enable-arttango... auto
checking for --enable-bmpbutton... yes
checking for --enable-bmpcombobox... yes
checking for --enable-button... yes
checking for --enable-calendar... yes
checking for --enable-caret... yes
checking for --enable-checkbox... yes
checking for --enable-checklst... yes
checking for --enable-choice... yes
checking for --enable-choicebook... yes
checking for --enable-collpane... yes
checking for --enable-colourpicker... yes
checking for --enable-combobox... yes
checking for --enable-comboctrl... yes
checking for --enable-commandlinkbutton... yes
checking for --enable-dataviewctrl... yes
checking for --enable-datepick... yes
checking for --enable-detect_sm... yes
checking for --enable-dirpicker... yes
checking for --enable-display... yes
checking for --enable-editablebox... yes
checking for --enable-filectrl... yes
checking for --enable-filepicker... yes
checking for --enable-fontpicker... yes
checking for --enable-gauge... yes
checking for --enable-grid... yes
checking for --enable-headerctrl... yes
checking for --enable-hyperlink... yes
checking for --enable-imaglist... yes
checking for --enable-infobar... yes
checking for --enable-listbook... yes
checking for --enable-listbox... yes
checking for --enable-listctrl... yes
checking for --enable-notebook... yes
checking for --enable-notifmsg... yes
checking for --enable-odcombobox... yes
checking for --enable-popupwin... yes
checking for --enable-prefseditor... yes
checking for --enable-radiobox... yes
checking for --enable-radiobtn... yes
checking for --enable-richmsgdlg... yes
checking for --enable-richtooltip... yes
checking for --enable-rearrangectrl... yes
checking for --enable-sash... yes
checking for --enable-scrollbar... yes
checking for --enable-searchctrl... yes
checking for --enable-slider... yes
checking for --enable-spinbtn... yes
checking for --enable-spinctrl... yes
checking for --enable-splitter... yes
checking for --enable-statbmp... yes
checking for --enable-statbox... yes
checking for --enable-statline... yes
checking for --enable-stattext... yes
checking for --enable-statusbar... yes
checking for --enable-taskbaricon... yes
checking for --enable-tbarnative... yes
checking for --enable-textctrl... yes
checking for --enable-datepick... yes
checking for --enable-tipwindow... yes
checking for --enable-togglebtn... yes
checking for --enable-toolbar... yes
checking for --enable-toolbook... yes
checking for --enable-treebook... yes
checking for --enable-treectrl... yes
checking for --enable-treelist... yes
checking for --enable-commondlg... yes
checking for --enable-aboutdlg... yes
checking for --enable-choicedlg... yes
checking for --enable-coldlg... yes
checking for --enable-filedlg... yes
checking for --enable-finddlg... yes
checking for --enable-fontdlg... yes
checking for --enable-dirdlg... yes
checking for --enable-msgdlg... yes
checking for --enable-numberdlg... yes
checking for --enable-splash... yes
checking for --enable-textdlg... yes
checking for --enable-tipdlg... yes
checking for --enable-progressdlg... yes
checking for --enable-wizarddlg... yes
checking for --enable-menus... yes
checking for --enable-miniframe... yes
checking for --enable-tooltips... yes
checking for --enable-splines... yes
checking for --enable-mousewheel... yes
checking for --enable-validators... yes
checking for --enable-busyinfo... yes
checking for --enable-hotkey... auto
checking for --enable-joystick... yes
checking for --enable-metafile... auto
checking for --enable-dragimage... yes
checking for --enable-accessibility... no
checking for --enable-uiactionsim... yes
checking for --enable-dctransform... yes
checking for --enable-webviewwebkit... yes
checking for --enable-palette... yes
checking for --enable-image... yes
checking for --enable-gif... yes
checking for --enable-pcx... yes
checking for --enable-tga... yes
checking for --enable-iff... yes
checking for --enable-pnm... yes
checking for --enable-xpm... yes
checking for --enable-ico_cur... yes
checking for --enable-dccache... yes
checking for --enable-ps-in-msw... yes
checking for --enable-ownerdrawn... yes
checking for --enable-uxtheme... yes
checking for --enable-wxdib... yes
checking for --enable-webviewie... yes
checking for --enable-autoidman... no
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking whether we are using the Intel C compiler... no
checking how to run the C preprocessor... gcc -E
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking whether gcc needs -traditional... no
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking whether we are using the Intel C++ compiler... no
checking whether we are using the Sun C++ compiler... no
checking for ar... ar
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for langinfo.h... yes
checking for wchar.h... yes
checking for sys/select.h... yes
checking for cxxabi.h... yes
checking for an ANSI C-conforming const... yes
checking for inline... inline
checking size of short... 2
checking size of void *... 8
checking size of int... 4
checking size of long... 8
checking size of size_t... 8
checking size of long long... 8
checking size of wchar_t... 4
checking for va_copy... yes
checking whether the compiler supports variadic macros... yes
checking for _FILE_OFFSET_BITS value needed for large files... 64
checking if large file support is available... yes
checking for _LARGEFILE_SOURCE value needed for large files... no
checking whether byte ordering is bigendian... no
checking for iostream... yes
checking if C++ compiler supports the explicit keyword... yes
checking for std::wstring in <string>... yes
checking for std::istream... yes
checking for std::ostream... yes
checking how to run the C++ preprocessor... g++ -E
checking type_traits usability... no
checking type_traits presence... no
checking for type_traits... no
checking tr1/type_traits usability... yes
checking tr1/type_traits presence... yes
checking for tr1/type_traits... yes
checking for __sync_fetch_and_add and __sync_sub_and_fetch builtins... yes
checking for libraries directories... /usr/lib/x86_64-linux-gnu /usr/lib
checking for cos... no
checking for floor... no
checking if floating point functions link without -lm... no
checking for sin... yes
checking for ceil... yes
checking if floating point functions link with -lm... yes
checking for strtoull... yes
configure: WARNING: Defaulting to the builtin regex library for Unicode build.
checking for zlib.h >= 1.1.4... yes
checking for zlib.h... (cached) yes
checking for deflate in -lz... yes
checking for png.h > 0.90... yes
checking for png.h... (cached) yes
checking for png_sig_cmp in -lpng... yes
checking for jpeglib.h... yes
checking for jpeg_read_header in -ljpeg... yes
checking for tiffio.h... yes
checking for TIFFError in -ltiff... yes
checking for expat.h... yes
checking if expat.h is valid C++ header... yes
checking for XML_ParserCreate in -lexpat... yes
checking for GTK+ version...
checking for pkg-config... /usr/bin/pkg-config
checking for GTK+ - version >= 2.6.0... no
*** Could not run GTK+ test program, checking why...
*** The test program failed to compile or link. See the file config.log for the
*** exact error that occurred. This usually means GTK+ is incorrectly installed.
checking for pkg-config... (cached) /usr/bin/pkg-config
checking for GTK+ - version >= 3.0.0... no
*** Could not run GTK+ test program, checking why...
*** The test program failed to compile or link. See the file config.log for the
*** exact error that occured. This usually means GTK+ is incorrectly installed.
checking for gtk-config... no
checking for GTK - version >= 1.2.7... no
*** The gtk-config script installed by GTK could not be found
*** If GTK was installed in PREFIX, make sure PREFIX/bin is in
*** your path, or set the GTK_CONFIG environment variable to the
*** full path to gtk-config.
checking for gtk-config... (cached) no
checking for GTK - version >= 1.2.3... no
*** The gtk-config script installed by GTK could not be found
*** If GTK was installed in PREFIX, make sure PREFIX/bin is in
*** your path, or set the GTK_CONFIG environment variable to the
*** full path to gtk-config.
configure: error:
The development files for GTK+ were not found. For GTK+ 2, please
ensure that pkg-config is in the path and that gtk+-2.0.pc is
installed. For GTK+ 1.2 please check that gtk-config is in the path,
and that the version is 1.2.3 or above. Also check that the
libraries returned by 'pkg-config gtk+-2.0 --libs' or 'gtk-config
--libs' are in the LD_LIBRARY_PATH or equivalent.

Error running configure
ERROR: failed building wxWidgets
Traceback (most recent call last):
  File "build.py", line 1259, in cmd_build_wx
    wxbuild.main(wxDir(), build_options)
  File "/tmp/pip-build-2evi4tjt/wxpython/buildtools/build_wxwidgets.py", line 368, in main
    "Error running configure")
  File "/tmp/pip-build-2evi4tjt/wxpython/buildtools/build_wxwidgets.py", line 85, in exitIfError
    raise builder.BuildError(msg)
buildtools.builder.BuildError: Error running configure
Finished command: build_wx (0m12.566s)
Finished command: build (0m12.566s)
Command '"/home/travis/virtualenv/python3.6.2/bin/python" -u build.py build' failed with exit code 1.

----------------------------------------

Command "/home/travis/virtualenv/python3.6.2/bin/python -u -c "import setuptools, tokenize;file='/tmp/pip-build-2evi4tjt/wxpython/setup.py';f=getattr(tokenize, 'open', open)(file);code=f.read().replace('\r\n', '\n');f.close();exec(compile(code, file, 'exec'))" install --record /tmp/pip-ykt87at0-record/install-record.txt --single-version-externally-managed --compile --install-headers /home/travis/virtualenv/python3.6.2/include/site/python3.6/wxpython" failed with error code 1 in /tmp/pip-build-2evi4tjt/wxpython/ The command "pip install -U wxpython" failed and exited with 1 during . Your build has been stopped.

# Put code sample here

Just create a travis.xml file like this:

language: python python:

• "3.6.2"

command to install dependencies

install: #I included this one for consistency of what I did.

• "pip install requests coveralls nose-htmloutput nose coverage"
• "pip install -U wxpython"

Operating system: Ubuntu 22.04 wxPython version & source: PyPi Python version & source: Python 3.10.6

Description of the problem: As described in this issue very well: https://github.com/wxWidgets/Phoenix/issues/2225, current install of wxpython version 4.2.0 (https://pypi.org/project/wxPython/4.2.0/) fails, due to missing dependency to attrdict module, imported here: https://github.com/wxWidgets/Phoenix/blob/b567d1e6e3aff88f900d5ec4fb148531746b211d/buildtools/config.py#L30

Proposed Solution To me, it seems like cherry picking this commit: https://github.com/wxWidgets/Phoenix/commit/2e9169effa9abf14f34f8436a791b8829eea7774, to the 4.2.0 release (https://github.com/wxWidgets/Phoenix/releases/tag/wxPython-4.2.0), and doing a patch release would solve the problem.

Note However, I am also wondering, since the dependency is needed in buildtools/config.py, wouldn't this dependency fit better in requirements/intall.txt, instead of devel.txt?

E.g. here: https://github.com/wxWidgets/Phoenix/commit/2e9169effa9abf14f34f8436a791b8829eea7774#diff-48561a6ac9f59b3b79790238a78d2c345125e61834588671ac55f3fdafe1cd58R24

Operating system: Linux wxPython version & source: self-built Python version & source: https://github.com/x211321/RGB-Config-Acer-gkbbl-0

Description of the problem:

In the source the icon looks normal but when built and the application is running, the tray icon becomes blurry.

Here is a screenshot of how the icon should look laid on top of how it does look and compared to other KDE Plasma tray icons.

https://github.com/x211321/RGB-Config-Acer-gkbbl-0/blob/main/assets/tray/color.png
https://github.com/x211321/RGB-Config-Acer-gkbbl-0/blob/main/assets/tray/outline_white.png

Operating system: Windows 10, x64 wxPython version & source: 4.2.1a1 (build artifact from 24 Dec 2022) Python version & source: 3.11.1 from official website

Description of the problem: When I Rescale a wx.Image using wx.IMAGE_QUALITY_HIGH, sometimes the image disappears (= becomes fully black). I think this happens when it's downsizing. When I specify wx.IMAGE_QUALITY_BOX_AVERAGE, it always disappears. I suspect wx.IMAGE_QUALITY_HIGH picks wx.IMAGE_QUALITY_BOX_AVERAGE when downsizing, and that wx.IMAGE_QUALITY_BOX_AVERAGE is broken.

Operating system: Windows 10, x64 wxPython version & source: 4.2.0, using pip install Python version & source: Python 3.11.1

Description of the problem: When trying to build and install (after fixing the attrdict3 issue), I'm getting: C:\Program Files\Python311\python.exe: can't open file 'C:\Users\User': [Errno 2] No such file or directory

The full command it's trying to run, is: "C:\Program Files\Python311\python.exe" C:\Users\User Name\AppData\Local\Temp\pip-install-h8yxxxbv\wxpython_58b6707f001a4559a3356c51bf6f76cc\bin\waf-2.0.24 --msvc_arch=x64 --python="C:\Program Files\Python311\python.exe" --out=build/waf/3.11/x64/release configure build

Due to the space in the path not being escaped, the command line fails. The bug is in build.py, line 1769: cmd = '"%s" %s %s configure build %s' % (PYTHON, waf, ' '.join(build_options), options.extra_waf)

This should escape the second argument. So it should be: cmd = '"%s" "%s" %s configure build %s' % (PYTHON, waf, ' '.join(build_options), options.extra_waf)

Operating system: wxPython version & source: 4.2.0 Windows 10, PyPI Python version & source: C Python 3.10, anaconda

Description of the problem: I'm using the wx.html.HtmlListBox to display interactive user content since 4.0. Visually the items are already distinct and were looking fine. Since Version 4.2.0 wxPython introduces separator lines between each row that I did not find an option to switch of.

Is there any workaround or hidden setting to get back to the old view?

I've attached two screen shots from wxPython 4.1.1 and 4.2.0 for comparison: