BETA This is a beta release. There will be some bugs, issues, etc. Please bear with us and open issues in the repo.
Hilo
Hilo integration for Home Assistant
Introduction
This is a custom component to allow control of Hilo devices from Home Assistant. This is an unofficial integration and unsupported by Hilo.
We are not employees of, or paid by, Hilo. We can't be held responsible if your account is getting suspended because of the use of this integration. Hilo might change their API any time and this might break this integration.
Shout out
Big shout out to Francis Poisson who's the original author of this integration. Without the work he put into this integration, I would probably have never even considered Hilo.
I decided to move the integration here because of the latest updates from Hilo broke the original one and I took the time to completely rewrite it. Hilo is now pushing device readings via websocket from SignalR.
Features
- Support for switches and dimmers as light devices
- Get current and set target temperature of thermostat
- Get energy usage of pretty much each devices
- Generates energy meters and sensors
- Sensor for Hilo Events (challenges)
- Sensor for Hilo Gateway
- NEW: Now configuration is done via the UI
- NEW: Updates are now closer to realtime
To Do:
- Add functionalities for other devices
- unit and functional tests
- Adding type hints to the code
Write a separate library for the hilo api mappingNow available here- Translate everything in French
#tokebakissite
Installation
Manual
Copy the custom_components/hilo directory from the latest release to your custom_components directory.
HACS
Follow standard HACS procedure to install.
Configuration
Just add the integration in the Integrations GUI.
If you want to use the energy meters, make sure you have a utility_meter section in your configuration.yaml file, even if it's empty.
Advanced configuration
Some options are available under the Configure button in Home Assistant:
-
generate_energy_meters: Boolean (beta) Will generate all the entities and sensors required to feed theEnergydashboard. For details, see the note below. -
hq_plan_name: String Define the Hydro Quebec rate plan name. Only 2 values are supported at this time:rate dflex d
-
scan_interval: Integer Number of seconds between each device update. Defaults to 60 and it's not recommended to go below 30 as it might result in a suspension from Hilo.
Energy meters
Energy meters are a new feature of this integration. We used to manually generate them with template sensors and automation but they now have been fully integrated into the Hilo integration.
All generated entities and sensors will be prefixed with hilo_energy_ or hilo_rate_.
How to enable them
-
If you never configured any utility meter, you will need to add an empty
utility_meterblock in yourconfiguration.yaml. The reason why we do this is because there's no official API to integrate the meters. -
Restart home assistant and wait 5 minutes until you see the
sensor.hilo_energy_total_lowentity gettin created and populated with data:- The
statusshould be incollecting - The
stateshould be a number higher than 0.
- The
-
If you see the following error in your logs, this is a bug in Home Assist and it's because the power meter in question has 0 w/h usage so far. This will disappear once usage has been calculated. There's a PR upstream here to address this.
2021-11-29 22:03:46 ERROR (MainThread) [homeassistant] Error doing job: Task exception was never retrieved Traceback (most recent call last): [...] ValueError: could not convert string to float: 'None'
Lovelace sample integration
Here's an example on how to add the energy data to Lovelace:
- type: vertical-stack
cards:
- type: horizontal-stack
cards:
- type: entity
entity: binary_sensor.defi_hilo
icon: mdi:fire
- type: entity
entity: sensor.smartenergymeter
name: Hydro
icon: mdi:speedometer
- type: entity
entity: sensor.hilo_rate_current
name: Cout Actuel
- type: energy-date-selection
- type: energy-sources-table
- type: energy-usage-graph
- type: energy-distribution
link_dashboard: true
Warning
When enabling Hilo generated energy meters, it's recommended to remove the manually generated ones to have the most accurate statistics, otherwise we might end up with duplicate data.
This wasn't tested with already active data and energy entities (ie: Battery, Gaz, Solar, or even other individual devices). It's possible that enabling this will break or delete these original sensors. We can't be held responsible for any data loss service downtime, or any kind as it's described in the license.
If you're facing an issue and you want to collaborate, please enable debug log level for this integration and provide a copy of the home-assistant.log file. Details on how to enable debug are below.
References
As stated above, this is an unofficial integration. Hilo is not supporting direct API calls and might obfuscate the service or prevent us from using it.
For now, these are the swagger links we've found:
- https://wapphqcdev01-automation.azurewebsites.net/swagger/index.html
- https://wapphqcdev01-notification.azurewebsites.net/swagger/index.html
- https://wapphqcdev01-clientele.azurewebsites.net/swagger/index.html
Contributing
Reporting any kind of issue is a good way of contributing to the project and it's available to anyone.
If you face any kind of problem or weird behavior, please submit an issue and ideal, attach debug logs.
To enable debug log level, you need to add this to your configuration.yaml file:
logger:
default: info
logs:
custom_components.hilo: debug
pyhilo: debug
If you have any kind of python/home-assistant experience and want to contribute to the code, feel free to submit a merge request.
je n'ai pas eu le temps de passer tout les log en revu j'ai juste remarqué ça:
1 Jan 10, 2022
2 Sep 15, 2022
1 Jan 03, 2022
6 Aug 19, 2022
1 Nov 20, 2021
5 Apr 27, 2022
10 Dec 01, 2022
16 Dec 06, 2022
0 Feb 21, 2022
4 Jul 23, 2022
17 Jul 07, 2022
5 Sep 23, 2022
3 Sep 30, 2022
17 Oct 28, 2022
3 Aug 23, 2022
3 Dec 21, 2021
37 May 11, 2022
1 Jan 06, 2022
2 Jan 07, 2022
38 Jul 17, 2022