Servo valve moogd634-374c

Servo valve moogD634-374C It is mainly used in power plants and power industry , So in daily use , What details should users pay attention to ？ How to maintain it at ordinary times , To make the servo valve moogD634-374C Better performance ？ Because many users do not pay enough attention to maintenance problems in use , As a result, the use effect of the product is greatly reduced . Next , Ningbo Sicheng will tell you about servo valves moogD634-374C Contents of daily maintenance and service .

chart / writing Ningbo thinks of him Jing

1、 Establish new oil as “ Dirty oil ” The concept of , If the amount of new oil in the tank exceeds 10%, Replace the cleaning plate , Turn on the oil source , Cleaning over 24 Hours later, , Replace or clean the oil filter , Remove the cleaning tray , Replace the servo valve . Usually , The hydraulic fluid that passes through the filter continuously for a long time is usually clean . therefore , When there is no leakage in the system , The amount of unnecessary supplementary fuel should be reduced , To avoid re contamination of the system .

2、 During the oil change of the system , The oil tank should be thoroughly cleaned first , Then replace the oil tank with a flushing plate , Reuse 5-10μ m The new oil is injected into the oil tank through the oil filter of . Turn on the oil source , Conduct 24 Rinse for more than hours , Then replace or clean the filter , Finally, clean the pipeline and oil tank .

3、 Servo valve moogD634-374C The oil source should have good service conditions and relatively good oil quality , And the oil can not be changed for a relatively long time , This is conducive to the reliable operation of the system .

4、 Do not let ferromagnetic materials contact the motor housing for a long time , To prevent the motor from magnetic leakage , When the magnetic run is serious , The servo valve may not work properly , When the running magnet is light , It will affect the zero point and output of the servo valve .